Cartridges, Sources
Ortofon MC Windfeld Ti High end Moving Coil Cartridge
Ortofon MC Windfeld Ti High end Moving Coil Cartridge
The Ortofon MC Windfell Ti sits above the Cadenza Black in the Ortofon range. Whilst it looks similar in appearance to the Cadenza Black there are several key difference between thm that lift the performance of this cartridge significantyly above that of the Cadenza Black. Only the Anna models sit above the Windfeld. If you are looking for the ultimate in vinyl replay performance then the MC Windfeld Ti should be on your shortlist. It is a true reference product and awarded product of the year by the absolute sound magazine.
Please get in touch if you would like to hear it in your system.
As with most moving coil cartridges the stylus is not replaceable on MC Windfeld Ti. Instead Ortofon offer a trade in scheme which offers a generous allowance towards you replacement cartridge.
Visit the following web page to find out more. http://www.henleyaudio.co.uk
You can find out more about the other cartridges available from DNA Audio by following this link: https://dnaaudio.co.uk/product_brand/ortofon/
Ortofon MC Windfeld Ti Specification.
Output voltage at 1000 Hz, 5cm/sec. – 0.3 mV
Channel balance at 1 kHz – < 0.2 dB
Channel separation at 1 kHz – > 28 dB
Channel separation at 15 kHz – > 22 dB
Frequency range at – 3dB – 10-80 kHz
Frequency response – 20-20 kHz + / – 1 dB
Tracking ability at 315Hz at recommended tracking force – 100 µm
Compliance, dynamic, lateral – 16 µm/mN
Stylus type – Nude Ortofon Replicant 100, special polished
Stylus tip radius – r/R 5/100 µm
Tracking force range – 2.3-2.8 g (23-28 mN)
Tracking force, recommended – 2.6 g (26 mN)
Tracking angle – 23°
Internal impedance, DC resistance – 4 Ohm
Recommended load impedance – > 10 Ohm
Cartridge body material – Stainless steel/special alloy
Cartridge colour – Black/Black
Cartridge weight – 13 gram
Share
Share